N7100XXDLJ2 N7100OXADLJ2 OXA JB Android 4.1.2 Leaked 2.zip
CLICK HERE ===> https://blltly.com/2tu7Qz
N7100XXDLJ2 N7100OXADLJ2 OXA JB Android 4.1.2 Leaked 2.zip
How to Install N7100XXDLJ2 N7100OXADLJ2 OXA JB Android 4.1.2 Leaked 2.zip on Samsung Galaxy Note 2
If you are looking for a way to update your Samsung Galaxy Note 2 to the latest Android 4.1.2 Jelly Bean firmware, you might be interested in trying out the leaked version of N7100XXDLJ2 N7100OXADLJ2 OXA JB Android 4.1.2 Leaked 2.zip. This is an unofficial firmware that has been released by a developer on XDA-Developers forum, and it is based on the official Samsung firmware for Germany.
Before you proceed, please note that this is not an official update from Samsung, and it may contain some bugs and issues. You should only install it at your own risk, and make sure you backup your data and follow the instructions carefully. Also, this firmware is only compatible with the Samsung Galaxy Note 2 model number GT-N7100, so do not try it on any other device.
Requirements
A Samsung Galaxy Note 2 GT-N7100 with at least 50% battery charge.
A Windows PC with Samsung USB drivers installed.
A USB cable to connect your phone to your PC.
The N7100XXDLJ2 N7100OXADLJ2 OXA JB Android 4.1.2 Leaked 2.zip file, which you can download from here.
The Odin3 v3.07 tool, which you can download from here.
Steps
Extract the N7100XXDLJ2 N7100OXADLJ2 OXA JB Android 4.1.2 Leaked 2.zip file on your PC using a tool like WinRAR or 7-Zip. You should get a file named N7100XXDLJ2_N7100OXADLJ2_N7100XXDLIH_HOME.tar.md5.
Extract the Odin3 v3.07 zip file on your PC and run the Odin3 v3.07.exe file as administrator.
Turn off your phone and boot it into download mode by pressing and holding Volume Down + Home + Power buttons together until you see a warning screen. Then press Volume Up to confirm.
Connect your phone to your PC using the USB cable. You should see a blue box in Odin indicating that your device is recognized.
In Odin, click on the PDA button and browse to the N7100XXDLJ2_N7100OXADLJ2_N7100XXDLIH_HOME.tar.md5 file that you extracted in step 1.
Make sure that only Auto Reboot and F. Reset Time options are checked in Odin, and nothing else.
Click on the Start button in Odin to begin the flashing process. Do not disconnect your phone or interrupt the process until it is finished.
When the flashing is completed, your phone will reboot automatically and you will see a PASS message in Odin.
Disconnect your phone from your PC and enjoy the new Android 4.1.2 Jelly Bean firmware on your Samsung Galaxy Note 2.
Troubleshooting
If you encounter any problems during or after the installation, you can try the following solutions:
If your phone gets stuck at the Samsung logo or boot loop, you can perform a factory reset by booting into recovery mode (press and hold Volume Up + Home + Power buttons together) and selecting wipe data/factory reset and wipe cache partition options.
If you get any errors in Odin, such as "FAIL" or "MD5 mismatch", you can try to re-download the firmware file and flash a474f39169