top of page


Öffentlich·136 Mitglieder
Jose Lim
Jose Lim


Note: the r24rf08.exe program automatically sets the serial port parameters. It also works fine with Wine under Linux - provided that a symlink (com1) exists in the .wine/dos_devices directory, and points to the /dev/ttySX for the actual serial port.


step1 read the ja axx way to read 24rf08 The dump from joe's keymaker interface is encrypted from him.step2 Look the Datasheet of 24rfo8c _documents/DOC1072.PDFthe i2cBus PIN VERSION 24rf08 step3 a. download the r24rf08 from ALLservice, and make the interface (look the destnation folder C:\ALLservice\24RF08 the simple-i2cprog.pdf is the interface, with reader software) b.Alternative you can build the interface from _eeprom_ibm.htm step4 use only the GNL , SCL ,SDA pins from the atmel 24rf08 and do the same reading way like jaa axx say,when your laptop boot and ask for the password plug the GNL, SCL, SDA pins with interface and run from second pc the reader software r24rf08.exe . (Don't unsolder the 24rf08 from the motherboard)step 5 open the dump file with ibmpass2 and you can see clean usefully information's ...or use the dos version ibmpass if you need only the password. The dump from this page is not crypted from no one else , except manufacturer keyboard scancode. Excelled decoder for the keyboard scancode coming from =56 *if the 24rf08 ic is brurned try to replace with 24c08 serial eeprom soic-8. 350c69d7ab


Willkommen in der Gruppe! Hier können Sie sich mit anderen M...


  • S
  • G
  • Ceridwen Ceridwen
    Ceridwen Ceridwen
  • M
  • Hobz Mfpkd
    Hobz Mfpkd
bottom of page