Honeywell Dolphin 70e USB Driver: A Guide to Connect and Configure Your Ring Scanner
Honeywell Dolphin 70e USB Driver: How to Install, Update and Use
The Honeywell Dolphin 70e is a rugged and versatile mobile computer that can be used for various applications such as barcode scanning, data collection, and communication. It can also be configured as a wearable device with a ring scanner for hands-free operation. However, to make the most of your Dolphin 70e, you need to install, update and use the Honeywell Dolphin 70e USB driver on your Windows PC.
honeywell dolphin 70e usb driver
Download Zip: https://www.google.com/url?q=https%3A%2F%2Fgohhs.com%2F2tWyLL&sa=D&sntz=1&usg=AOvVaw3h3HqaBkri89Q7MwkFSfTS
The Honeywell Dolphin 70e USB driver is a software component that allows your PC to communicate with your Dolphin 70e device over a USB connection. It enables you to transfer files, synchronize data, configure settings, and update firmware on your device. Without the proper driver, your PC may not recognize your device or may encounter errors when connecting.
In this article, we will show you how to install, update and use the Honeywell Dolphin 70e USB driver for different types of scanners that you can use with your device. We will also show you how to enable the USB mass storage mode on your device if you want to access it as a drive letter on your PC.
What Types of Scanners Can You Use with Honeywell Dolphin 70e?
The Honeywell Dolphin 70e supports four types of scanners that you can use with your device:
Serial scanner: A tethered ring scanner that connects to your device via a serial port
USB scanner: A tethered ring scanner that connects to your device via a USB port
Bluetooth scanner: A wireless ring scanner that connects to your device via Bluetooth
NGW scanner: A wireless ring scanner that connects to your device via an NGW module
Each type of scanner requires a different set of software components to work properly with your device. You need to download and install these components from the Honeywell Download Center according to your scanner type.
How to Install Honeywell Dolphin 70e USB Driver for Serial Scanner?
If you are using a serial scanner with your device, you need to download and install the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
XRS_4004_10.cab (Driver for the tethered ring scanners)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)
RFTermWM2Cu.cab (RFTerm terminal emulator)
HoneywellVK-2.2.0.CAB (Provides the U-shaped keyboard in RFTerm)
SP_HoneywellVK-v2.0.0.5.CAB (ServicePack on top of the virtual keyboard CAB file)
After downloading these files, copy them to the '\\IPSM\\Honeywell\\autoinstall' folder on your device and reboot it. The device will automatically install the files and configure the scanner.
How to Install Honeywell Dolphin 70e USB Driver for USB Scanner?
If you are using a USB scanner with your device, you need to download and install the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
XRS_4004_10.cab (Driver for the tethered ring scanners)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)
RFTermWM2Cu.cab (RFTerm terminal emulator)
HoneywellVK-2.2.0.CAB (Provides the U-shaped keyboard in RFTerm)
SP_HoneywellVK-v2.0.0.5.CAB (ServicePack on top of the virtual keyboard CAB file)
PowerTools_812.2139.CAB (Provides PowerTools to configure the scanner)
After downloading these files, copy them to the '\\IPSM\\Honeywell\\autoinstall' folder on your device and reboot it. The device will automatically install
the files and configure the scanner.
How to Install Honeywell Dolphin 70e USB Driver for Bluetooth Scanner?
If you are using a Bluetooth scanner with your device, you need to download and install
the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
BT_D70e_5.CAB (Provides Bluetooth support for the device)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)
RFTermWM2Cu.cab (RFTerm terminal emulator)
HoneywellVK-2.2.0.CAB (Provides the U-shaped keyboard in RFTerm)
Honeywell Dolphin 70e USB Driver: How to Install, Update and Use
The Honeywell Dolphin 70e is a rugged and versatile mobile computer that can be used for various applications such as barcode scanning, data collection, and communication. It can also be configured as a wearable device with a ring scanner for hands-free operation. However, to make the most of your Dolphin 70e, you need to install, update and use the Honeywell Dolphin 70e USB driver on your Windows PC.
The Honeywell Dolphin 70e USB driver is a software component that allows your PC to communicate with your Dolphin 70e device over a USB connection. It enables you to transfer files, synchronize data, configure settings, and update firmware on your device. Without the proper driver, your PC may not recognize your device or may encounter errors when connecting.
In this article, we will show you how to install, update and use the Honeywell Dolphin 70e USB driver for different types of scanners that you can use with your device. We will also show you how to enable the USB mass storage mode on your device if you want to access it as a drive letter on your PC.
What Types of Scanners Can You Use with Honeywell Dolphin 70e?
The Honeywell Dolphin 70e supports four types of scanners that you can use with your device:
Serial scanner: A tethered ring scanner that connects to your device via a serial port
USB scanner: A tethered ring scanner that connects to your device via a USB port
Bluetooth scanner: A wireless ring scanner that connects to your device via Bluetooth
NGW scanner: A wireless ring scanner that connects to your device via an NGW module
Each type of scanner requires a different set of software components to work properly with your device. You need to download and install these components from the Honeywell Download Center according to your scanner type.
How to Install Honeywell Dolphin 70e USB Driver for Serial Scanner?
If you are using a serial scanner with your device, you need to download and install the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
XRS_4004_10.cab (Driver for the tethered ring scanners)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)
RFTermWM2Cu.cab (RFTerm terminal emulator)
HoneywellVK-2.2.0.CAB (Provides the U-shaped keyboard in RFTerm)
SP_HoneywellVK-v2.0.0.5.CAB (ServicePack on top of the virtual keyboard CAB file)
After downloading these files, copy them to the '\\IPSM\\Honeywell\\autoinstall' folder on your device and reboot it. The device will automatically install the files and configure the scanner.
How to Install Honeywell Dolphin 70e USB Driver for USB Scanner?
If you are using a USB scanner with your device, you need to download and install the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
XRS_4004_10.cab (Driver for the tethered ring scanners)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)
RFTermWM2Cu.cab (RFTerm terminal emulator)
HoneywellVK-2.2.0.CAB (Provides the U-shaped keyboard in RFTerm)
SP_HoneywellVK-v2.0.0.5.CAB (ServicePack on top of the virtual keyboard CAB file)
PowerTools_812.2139.CAB (Provides PowerTools to configure the scanner)
After downloading these files, copy them to the '\\IPSM\\Honeywell\\autoinstall' folder on your device and reboot it. The device will automatically install
the files and configure the scanner.
How to Install Honeywell Dolphin 70e USB Driver for Bluetooth Scanner?
If you are using a Bluetooth scanner with your device, you need to download and install
the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
BT_D70e_5.CAB (Provides Bluetooth support for the device)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)
RFTermWM2Cu.cab (RFTerm terminal emulator)</li
Honeywell Dolphin 70e USB Driver: How to Install, Update and Use
The Honeywell Dolphin 70e is a rugged and versatile mobile computer that can be used for various applications such as barcode scanning, data collection, and communication. It can also be configured as a wearable device with a ring scanner for hands-free operation. However, to make the most of your Dolphin 70e, you need to install, update and use the Honeywell Dolphin 70e USB driver on your Windows PC.
The Honeywell Dolphin 70e USB driver is a software component that allows your PC to communicate with your Dolphin 70e device over a USB connection. It enables you to transfer files, synchronize data, configure settings, and update firmware on your device. Without the proper driver, your PC may not recognize your device or may encounter errors when connecting.
In this article, we will show you how to install, update and use the Honeywell Dolphin 70e USB driver for different types of scanners that you can use with your device. We will also show you how to enable the USB mass storage mode on your device if you want to access it as a drive letter on your PC.
What Types of Scanners Can You Use with Honeywell Dolphin 70e?
The Honeywell Dolphin 70e supports four types of scanners that you can use with your device:
Serial scanner: A tethered ring scanner that connects to your device via a serial port
USB scanner: A tethered ring scanner that connects to your device via a USB port
Bluetooth scanner: A wireless ring scanner that connects to your device via Bluetooth
NGW scanner: A wireless ring scanner that connects to your device via an NGW module
Each type of scanner requires a different set of software components to work properly with your device. You need to download and install these components from the Honeywell Download Center according to your scanner type.
How to Install Honeywell Dolphin 70e USB Driver for Serial Scanner?
If you are using a serial scanner with your device, you need to download and install the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
XRS_4004_10.cab (Driver for the tethered ring scanners)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)
RFTermWM2Cu.cab (RFTerm terminal emulator)
HoneywellVK-2.2.0.CAB (Provides the U-shaped keyboard in RFTerm)
SP_HoneywellVK-v2.0.0.5.CAB (ServicePack on top of the virtual keyboard CAB file)
After downloading these files, copy them to the '\\IPSM\\Honeywell\\autoinstall' folder on your device and reboot it. The device will automatically install the files and configure the scanner.
How to Install Honeywell Dolphin 70e USB Driver for USB Scanner?
If you are using a USB scanner with your device, you need to download and install the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
XRS_4004_10.cab (Driver for the tethered ring scanners)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)
RFTermWM2Cu.cab (RFTerm terminal emulator)
HoneywellVK-2.2.0.CAB (Provides the U-shaped keyboard in RFTerm)
SP_HoneywellVK-v2.0.0.5.CAB (ServicePack on top of the virtual keyboard CAB file)
PowerTools_812.2139.CAB (Provides PowerTools to configure the scanner)
After downloading these files, copy them to the '\\IPSM\\Honeywell\\autoinstall' folder on your device and reboot it. The device will automatically install
the files and configure the scanner.
How to Install Honeywell Dolphin 70e USB Driver for Bluetooth Scanner?
If you are using a Bluetooth scanner with your device, you need to download and install
the following files from the Honeywell Download Center:
Kernel 40.04 with ServicePack 6
BT_D70e_5.CAB (Provides Bluetooth support for the device)
ScanWedgeNGW_812_2548.CAB (Scanwedge for the tethered and Bluetooth ring scanners)</li
How to Enable USB Mass Storage Mode on Honeywell Dolphin 70e Device?
If you want to access your Honeywell Dolphin 70e device as a drive letter when connected to your PC over USB, you need to enable USB Mass Storage mode on your device. This mode will allow you to transfer files between your PC and your Storage Card installed in your device.
Note: A Storage Card must be installed in your device to support this mode.
To enable USB Mass Storage mode on your Honeywell Dolphin 70e device, you need to do the following:
Go to 'Start' > 'Settings' > 'Connections' > 'USB to PC'.
Select 'Mass Storage' option.
Warm-boot the device.
After rebooting, your device will appear as a drive letter on your PC when connected over USB.
Conclusion
The Honeywell Dolphin 70e is a powerful and versatile mobile computer that can be used with different types of scanners for various applications. However, to make the most of your device, you need to install, update and use the Honeywell Dolphin 70e USB driver on your Windows PC. This driver will enable you to communicate with your device and perform various tasks such as data transfer, synchronization, configuration, and firmware update. You also need to enable the USB Mass Storage mode on your device if you want to access it as a drive letter on your PC.
We hope this article has helped you understand how to install, update and use the Honeywell Dolphin 70e USB driver for different types of scanners. If you have any questions or feedback, please feel free to contact us. ca3e7ad8fd